ChaseCam PDR 100 Bedienungsanleitung PDF herunterladen (Seite 40)

MoTeC Appendices 38

Values for L, Start Location:

Vertical Area: 1-4 to specify pixels from the left.

Horizontal Area: 1-8 to specify row pixels from the top.

11-31 to specify character position for text from the

left.

Values for W, Width:

Vertical Area: 1-4 for width in pixels.

Horizontal Area: 1-8 for row height in pixels.

1-9 for number of characters in text field.

NOTE: Horizontal bars will automatically fill into the single longest open

space on the line, not on both sides of text fields. If there are more than

one open space of equal lengths, the left-most would be used.

Definition of Data Line:

Starts with 0, then contains N data items corresponding to the N records

of most recent setup line sent.

0,xxxx,xxxx,xxxx,xxxx...

xxxx can be comma separated number values or text strings with no

comma allowed in text. This will be followed by a line terminator CR, or

LF, or CR-LF.

Number values must range from

0 through 255 in the case of bottom, top, left, or right anchoring or

-128 through 127 in the case of center anchoring.

Other decimal values may be transmitted but will be limited to the end-

of-scale values by the display routines.

For ticks types, the data value represents the interval between ticks

starting from the anchor position tick.

1 2 ... 35 36 37 38 39 40 41 42

Keine Kommentare

ChaseCam PDR 100 Bedienungsanleitung Seite 40